If you fiendishly diabolical smiths decide to do another 1911 .45
I can give up two new in packaging Wilson/Rogers 8 round mags.

Who loves ya baby


''You're telling me Marcel through a guy out of a 3 story window just for giving her a foot massage''...........

_________________
''ya can't argue logic with ignorance.''

I'd be good for the springs, an STI Ti hammer and a few other odds and ends you might need(extractor,ejector,etc)
Let me know...........Jeff

_________________
An armed society is a polite society--Robert Heinlein

If you guys want that HiPower I have lying around, that I mentioned way back on page 1, let me know.
I know you have to plan the job among everyone involved, and may have a gun or two ahead of it, but if you're interested, let me know, and it's yours.
It's a 1986 FN/Browning frame and internals, with an FM/Argentine top half, so it's nothing special, but serviceable.

Unless of course, I actually shoot the thing soon, and it shoots 1/2 MOA out to 200 yards- then I never heard of you.

I've been watching this board for months, I am very impressed with the unselfish dedication of all involved. I would like to donate to the cause. I have several 45 slides, barrels and internal parts if you need them. Please let me know. The smiths on LTW1 are to be commended, what a gorgeous pistol.

To everyone above who have donated parts, guns, etc....On behalf of everyone at LTW, thank you for your generous offers. It tells us we are doing the right things if we are attracting people such as you. When we get done with the Shot Show and the raffle on #1 we can get the motor running on #3. #3 has alot to live up to.

_________________
Heirloom Precision, LLC.
480-804-1911

"If everyone is thinking alike, someone isn't thinking."
- General George Patton Jr

Ditto! What a great group we have involved in our forums.

_________________
CT Brian Custom
'Blending Art With Firepower'

Definitely gratifying to have so much interest. #3 is gonna have to come with a CD that contains a "roll credits"!

I'll bring my donation and hand it to you at the SHOT show in Jan.
You'll be probably my first stop at the show and then I can have a "warm fuzzy" for the rest of the show.
Jeff

_________________
An armed society is a polite society--Robert Heinlein

KEWL!!!! I assume you're talking about my new C6 'Vette, right!!!!

_________________
CT Brian Custom
'Blending Art With Firepower'

OH for that!!!! I 'prolly could afford the gas tank cap for that.

You mean I'm NOT getting a new C-6????

Heck Swampertwo, you dashed my hopes!!!!

_________________
CT Brian Custom
'Blending Art With Firepower'

I have a near new FN HiPower Slide and Barrel, don't remember if it is a II or a II, somewhere in my closet. If I can find it and you are doing a HiPower, it's yours.

Richard

RichardZ, force them to do one!!!
Jeff

_________________
An armed society is a polite society--Robert Heinlein

+1


Rich

Hi everyone,
I am a newbie here and want to pitch in as well. Looks like LTW #3 is almost there, I have a brand new Gov SA Mil-Spec SS slide ready to go if needed. And I will donate a set of the new Yo-Bo site as well. Just let me know.
Thank you all

Reading throught the posts here it looks like we are still in need of a FRAME for this project. I checked my bin-o-future 1911s and it seems there is a Caspian 5" frame that has no proposed build sheet with it.

Since it seems like we are going the 9x23 route, possibly at least, this could be the frame as it has a .38 Super feedramp IIRC and it is stainless steel (if that matters).

Chances are you guys will get to use it before me and our cause here is better than my own

I have a strange idea that LTW#3 might just be a stainless Colt .45ACP. The 9X23 would be fun to see, and so would a 10mm, but something just tells me a stainless .45 from Ted and Don is in the works. Who knows?

~Jim Keeney

_________________
"I'd rather die on my feet than keep living on my knees." - Emiliano Zapata, Mexican Revolutionary

I think that all this info is way out of date. We'll start a new one when LTW #3 is actually finished.

--Mark