ltwguns.com

It seems like it takes forever to accomplish, but every great once and a while I do manage to squeeze out a blaster for myself. The trick is to then hang on to it and take it shooting from time to time. This pistol started life as a Springfield Mil-Spec in Parkerized carbon steel. Over many months, the following work was performed to it:

Weld frame rails and re-fit to slide
Kart barrel and HD bushing & plug were fitted with HD slide stop
EGW extractor, ejector and FP stop fitted
HD Extreme Service rear sight & SDM front sight were fit with Over & Under tritium Stealth lamps
Slide top serrated 30 lpi
Rear of slide, ejector & extractor were serrated 50 lpi to match rear sight blade
Ball cuts and top border lines were cut, along with bottom bevel
Front strap checkered 30 lpi with smooth bottom border
Chen MSH fitted and checkered 30 lpi to match front strap
S&A beavertail and EGW thumb safety were fitted and blended
HD Extreme Service igntion set and smooth face trigger were installed and tuned to 3 lb. pull
HD extended mag catch and barstock plunger tube were fitted
Mag well beveled and exterior Carry Beveled
Exterior finished in Metaloy hard chrome lower and IonBond DLC on slide assy with polished flats
HD Carry Groove grips with HD hex head grip screws finish it off

_________________
shop.HarrisonCustom.com
www.HarrisonCustom.com

The grand essentials to happiness in this life are something to do, something to love and something to hope for.

That's a damn fine piece you have there John!

_________________
I will never forget you Lou......February 21, 2009

John Ralston
5 SHOT LEATHER, LLC - Finely Crafted Custom Handgun Leather

http://www.5ShotLeather.com

Very very nice John. If you can't find the time for it be sure to let me know

"It's not a crime to be good to yourself"...... great-looking replacement for the Raven, John!

Very nice indeed! I really like the finish choice on this one.

That gun has personality and a very fine piece. Thanks for sharing it.

_________________
Be safe and keep the brass flying

Terry Peters

Do your research but you get what you pay for front end or back end
http://www.pt-partners.com
@ptpartners_tx

Put me in line for that one - you know you'll sell it someday !

_________________
No good deed goes unpunished.

Very Nice

_________________
Jake Martens
Indianapolis, IN
https://www.facebook.com/USPSAIndiana

Another masterpiece as always

Wow, what a stunning piece of steel....

Nice shoes cobbler. I want to be adopted

_________________
"Bones heal, chicks dig scars, pain goes away"

Wow, amazing as always!

_________________
Semper Fi

that is a VERY nice pistol. Squeaky clean! I love 2 tones.

_________________
J. Timmons & Sons Custom 1911 Pistols
South Carolina
864-558-1911
www.jttimmonscustom1911pistols.com

I heart your shoes...

_________________
CT Brian Custom
'Blending Art With Firepower'

WOW! There is an awful lot to like about this one.

_________________
He who lives in harmony with himself lives in harmony with the universe.
-Marcus Aurelius

I want one just like the cobbler has!! Great balanced look and business tool!!

_________________
NRA Endowment Life Member
NRA Golden Eagles Member

Very well done John... now hurry up and engrave your initials on it so you won't be tempted to sell it!

_________________
Heirloom Precision
http://www.heirloomprecision.com

What I see here is a pair of alligator leather boots, a Mephisto wingtips, suede loafers, a few pairs of Jimmy Choo's for the lady of the house, and Nike sneakers for the local soccer team. And new tires for the truck.