ltwguns.com

Actions Speak Louder Than Words
It is currently Fri Jan 22, 2021 11:30 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 441 posts ]  Go to page Previous 111 12 13 14 15
Author Message
PostPosted: Thu Dec 17, 2020 10:07 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... the bottom end of barrel fitting for a current Colt “Classic” project gun.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Fri Dec 18, 2020 10:07 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... turning the barrel bushing for the current Colt “Classic” project gun.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Mon Dec 21, 2020 9:46 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... measuring and setting the headspace on the current Colt “Classic” project gun. Once the breechface is squared and the barrel fit to make solid contact with no end shake the headspace can be measure/set using a ”GO” gauge and feeler gauges.

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Tue Dec 22, 2020 9:47 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... sight work on the current Colt “Classic” project gun.

Rear of frame and slide is blended, rear sight dovetail machining, and narrowing the front sight to .110”... which I almost got perfect. :roll:

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Wed Dec 23, 2020 9:15 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... delivery day for a very patient client. Everything is important.

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Mon Dec 28, 2020 8:19 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... slide stop and slide stop notch engagement. Gotta’ make sure the contact at the back is square and that there is enough room at the front. Sometimes the notch gets re-cut, sometimes the slide stop, sometimes both.

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Tue Dec 29, 2020 9:02 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... beavertail blending and shaping before and after on the current Colt “Classic” Government Model project.

Image

Image

Image

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Wed Dec 30, 2020 8:48 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... adding a hard stop to the thumb safety on the current Colt “Classic” Government Model project.

I like using these Colt thumb safeties, they are on all my personal guns, and occasionally a client will request one for their build. Most of the time the detent pocket doesn’t align with the ‘stop’ surface that connects the safety lug to the backing plate. The result is a mushy feeling once the safety has been disengaged... basically the safety will move all the way down where it contacts the stop surface and then be pushed slightly upwards by the detent/detent pocket.

I want the safety to stop here in concert with the safety detent/detent pocket...

Image

... but the stop surface allows the safety to move to here...

Image

Machine a small hole in the stop surface, silver solder in pin, cut to size and insure full contact with the frame window, and blend the safety as needed.

Image

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Wed Dec 30, 2020 9:20 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4020
Location: MI
Verah nahze! Mushy, bouncy-back safeties, I hate 'em too.... sometimes there's more work getting the right safety feel than getting the trigger just so. That was a clever fix and great job with the silver.


Top
   
PostPosted: Wed Dec 30, 2020 10:23 am 
Offline
Senior Member

Joined: Thu Nov 04, 2004 1:15 pm
Posts: 535
Location: MI
Agreed, very elegant.


Top
   
PostPosted: Thu Dec 31, 2020 8:46 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Thanks gents.... stuff like this is lotsa' fun.

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Thu Dec 31, 2020 8:47 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... the best view from the bench, cutting the 30lpi front strap checkering.

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Mon Jan 04, 2021 8:59 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... 30lpi front strap checkering from laid out to full depth on the current Colt “Classic” Government Model project gun.

Image

Image

Image

Image

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Fri Jan 08, 2021 9:39 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... laying out the 30lpi checkering pattern on the mainspring housing of the current Colt “Classic” Government Model project gun. Once the vertical lines are started the masking tape acts as a visual guide for starting the horizontal lines.

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Mon Jan 11, 2021 9:11 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... everything will eventually break.

The sear spring from my personal gun seen here, note the broken tab from the left leaf. It happened sometime in the last 2K rounds or so... never affected the function of the gun.

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Tue Jan 12, 2021 7:32 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... checking for even and complete engagement between the hammer and sear.

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Wed Jan 13, 2021 7:41 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day… some pre-range session pics of the current Colt “Classic” Government Model project gun.

Once the gun is shot and the front sight height is confirmed I’ll start the final details like machining the ball-cuts, rear slide serrations, blending the front sight and inlaying the gold line, de-horn, etc.

Image

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Thu Jan 14, 2021 8:22 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... beveled mag-well before and after on the current Colt “Classic” Government Model project gun.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Mon Jan 18, 2021 7:23 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... one of the last modifications I add to a build is rear slide serrations. Here is a before and after look on the current Colt “Classic” Government Model project gun.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Tue Jan 19, 2021 8:10 am 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... prep and polish for the current Colt “Classic” Government Model project gun. The diagonal lines you see are the reflection of the rafters in my shop.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
PostPosted: Wed Jan 20, 2021 12:06 pm 
Offline
Administrator
Administrator

Joined: Thu Mar 04, 2004 4:56 pm
Posts: 1357
Location: Mesa, AZ
Photo of the day... before and after, the completed Colt “Classic” Government Model project.

Thanks to another great client for letting me do what I do.

Image

Image

_________________
Heirloom Precision
http://www.heirloomprecision.com


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 441 posts ]  Go to page Previous 111 12 13 14 15

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited