ltwguns.com

Actions Speak Louder Than Words
It is currently Wed Mar 18, 2026 6:45 am

» » »

All times are UTC-08:00



Post new topic  Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
John Harrison
PostPosted: Sat Mar 05, 2011 3:25 pm 
Offline
Board Member
Board Member

Joined: Thu Feb 19, 2004 10:26 am
Posts: 1306
Location: Kennesaw, GA
After answering requests from many customers for a rugged fixed sight to fit the popular TRP Operator, I'm proud to introduce the HD-006 Extreme Service rear sight. CAD designed and CNC 3-D machined specifically to fit the Springfield TRP Operator as well the standard BoMar cut. It allows you the option of replacing your delicate adjustable rear sight with an Extreme Service fixed rear sight with features better suited to tactical and self defense use. This sight features a rugged one-piece design. Sharp, snaggy corners have been eliminated by the fully radiused design.The forward face of the blade has a squared-off shoulder that allows properly trained personnel one-handed operation for malfunction clearance. Faster target acquisition is possible, thanks to a wider rear notch of .135" x .125", allowing more visible light into sight picture. The sight’s design allows full range of windage adjustment in each direction. TLike many other of the Extreme Service family of fixed rear sights, the HD-006 is also offered with Stealth Lamp tritium night sights in both the T1 single lamp "over and under" pattern as well as the T2 dual lamp design for a 3-dot lamp pattern. CNC machined from bar stock and Made inthe USA!

Fits the Springfield TRP Operator pistol and other 1911 pistols with standard BoMar style sight cuts. For all other Springfield adjustable sight applications, see my HD-002 rear sight. Available from https://shop.HarrisonCustom.com :D


Image
Image
ImageImage
ImageImage
ImageImage

_________________
shop.HarrisonCustom.com
www.HarrisonCustom.com

The grand essentials to happiness in this life are something to do, something to love and something to hope for.
Top
   
Reply with quote  
el_june
PostPosted: Sat Mar 05, 2011 5:15 pm 
Offline
Senior Member

Joined: Tue Mar 13, 2007 12:34 am
Posts: 290
Location: CA
Nicely done Sir.....
Top
   
Reply with quote  
John Harrison
PostPosted: Sun Mar 06, 2011 9:20 am 
Offline
Board Member
Board Member

Joined: Thu Feb 19, 2004 10:26 am
Posts: 1306
Location: Kennesaw, GA
There are quite a few Colt Series 80 pistols with BoMar adjustable rear sights, mounted in a manner so that they overhang the rear of the slide by quite a bit. I've had inquiries from owners of these pistols asking for a fixed rear sight that will fit flush with the rear of their slide. While I couldn't justify making a sight to specifically fit this application, I did have a limited quantity of HD-006 sights machined with an unfinished blade, to allow a gunsmith or machinist to mount the sight, machine the rear face forward to suit the application, then machine the notch and serrations. They are supplied "in the white" for gunsmith installation.

Available at https://shop.HarrisonCustom.com

Image
ImageImage

_________________
shop.HarrisonCustom.com
www.HarrisonCustom.com

The grand essentials to happiness in this life are something to do, something to love and something to hope for.
Top
   
Reply with quote  
A10ACN
PostPosted: Sun Mar 06, 2011 12:20 pm 
Offline
Members

Joined: Sat May 29, 2004 7:17 am
Posts: 173
Location: Back in the USAAAAA!!!!!
Quote:
There are quite a few Colt Series 80 pistols with BoMar adjustable rear sights, mounted in a manner so that they overhang the rear of the slide by quite a bit. I've had inquiries from owners of these pistols asking for a fixed rear sight that will fit flush with the rear of their slide. While I couldn't justify making a sight to specifically fit this application, I did have a limited quantity of HD-006 sights machined with an unfinished blade, to allow a gunsmith or machinist to mount the sight, machine the rear face forward to suit the application, then machine the notch and serrations. They are supplied "in the white" for gunsmith installation.

Available at https://shop.HarrisonCustom.com

Image
ImageImage
Now THAT is worthwhile. I'd like to see what someone good (hint-hint, John) could do with that on one of those Colt's with the lazy style, ass-hanging-off-the-back Bo-Mar mounts. Great idea!
Top
   
Reply with quote  
Ned Christiansen
PostPosted: Mon Mar 07, 2011 6:11 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4426
Location: MI
Good stuff Brother John!
Top
   
Reply with quote  
Mark Graff
PostPosted: Mon Mar 07, 2011 12:43 pm 
Offline
Board Member
Board Member

Joined: Sun Apr 25, 2004 4:32 pm
Posts: 442
Location: Casper, Wyoming
Nice to have choices...love the gunsmith blank.

_________________
https://www.graffcustom.com/
Top
   
Reply with quote  
Greyson
PostPosted: Wed Mar 09, 2011 3:03 pm 
Offline
Members

Joined: Mon Jan 09, 2006 9:48 pm
Posts: 49
Location: Cincinnati, OH
Wow! Nice options.

I was looking at your versions of this sites with tritium just yesterday.

Regards,
Greyson
Top
   
Reply with quote  
John Harrison
PostPosted: Mon Mar 21, 2011 5:39 am 
Offline
Board Member
Board Member

Joined: Thu Feb 19, 2004 10:26 am
Posts: 1306
Location: Kennesaw, GA
Quote:
Now THAT is worthwhile. I'd like to see what someone good (hint-hint, John) could do with that on one of those Colt's with the lazy style, ass-hanging-off-the-back Bo-Mar mounts. Great idea!

I'd be glad to, just send me one of yours and I'll see what I can do for you!

_________________
shop.HarrisonCustom.com
www.HarrisonCustom.com

The grand essentials to happiness in this life are something to do, something to love and something to hope for.
Top
   
Reply with quote  
Chocobo
PostPosted: Mon Mar 21, 2011 3:20 pm 
Offline
Members

Joined: Wed Sep 19, 2007 9:18 am
Posts: 65
Location: Oklahoma
Looks pretty cool.
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 9 posts ] 

» » »

All times are UTC-08:00

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited