ltwguns.com

Actions Speak Louder Than Words
It is currently Mon Mar 16, 2026 12:49 am

» » »

All times are UTC-08:00



Post new topic  Reply to topic  Page 1 of 1
  [ 15 posts ] 
  Previous topic | Next topic 
Author Message
Ned Christiansen
 Post subject: STI hi-cap with Conamyds
PostPosted: Mon Apr 11, 2011 7:52 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4426
Location: MI
Here's something a little different I've been working on. Different for me anyway as I rarley, rarely work on hi-caps.

STI is now offering subframes in aluminum. This customer wanted me to put Conamyds on the frontstrap for him, which I did but then it was clear it needed them elsewhere too, so I went out to the Conamyd tree and got some more.

I was going to just do that but I suspected the subframe might not just drop in, so I had him send the frame. He mentioned the gun was not realiable, so yup, he sent the whole thing.There was a fair amount of fitting the subframe so I'm glad we went that route. There were several other areas that benefitted from a little tweaking too.

I have a local gunsmith pal who is much more in tune with the hi-caps than I am, so he's working over the 10 or so mags for us. When I get them back, we'll see how it works..... it's in .38 Super.

Image

Image

Image
Top
   
Reply with quote  
Patrick Sweeney
PostPosted: Mon Apr 11, 2011 8:41 am 
Offline
Senior Member

Joined: Thu Nov 04, 2004 1:15 pm
Posts: 618
Location: MI
Ned, you didn't tell me it was in .38 Super. so it isn't "J's" gun, then?

That's just beyond amazing.
Top
   
Reply with quote  
Ned Christiansen
PostPosted: Mon Apr 11, 2011 10:21 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4426
Location: MI
Nope.
Top
   
Reply with quote  
Toan_Truong
PostPosted: Mon Apr 11, 2011 11:09 am 
Offline
Members

Joined: Fri Aug 05, 2005 6:55 pm
Posts: 74
Location: SF, California
so I went out to the Conamyd tree and got some more :lol: :lol: :lol:

So that's your little secrets!!!

_________________
"The best way to find yourself is to lose yourself in the service of others" Gandhi
Top
   
Reply with quote  
rasheed
PostPosted: Mon Apr 11, 2011 2:16 pm 
Offline
New Member

Joined: Wed Apr 30, 2008 4:58 am
Posts: 18
Location: Houston, TX
Quote:
Image
Ned,

Which thumb safety is that???




rasheed

_________________
STA Plt, USMC 1985-1993
Top
   
Reply with quote  
Ned Christiansen
PostPosted: Mon Apr 11, 2011 5:00 pm 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4426
Location: MI
Just the one that came on it from the factory-- an ambi STI.
Top
   
Reply with quote  
Ned Christiansen
PostPosted: Tue May 17, 2011 2:46 pm 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4426
Location: MI
The customer asked me to flute the barrel and put some Mini-Myds on top of the slide:

Image
Top
   
Reply with quote  
John Ralston
PostPosted: Wed May 18, 2011 6:58 am 
Offline
Firearms Industry
Firearms Industry

Joined: Thu Mar 24, 2005 8:59 pm
Posts: 917
Location: Colbert, WA USA
That looks like A TON of work...

_________________
I will never forget you Lou......February 21, 2009

John Ralston
5 SHOT LEATHER, LLC - Finely Crafted Custom Handgun Leather

http://www.5ShotLeather.com
Top
   
Reply with quote  
Ned Christiansen
PostPosted: Mon May 23, 2011 7:08 pm 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4426
Location: MI
Nobody's gonna ask what the extra hole is for? There's one just like it on the other side.
Top
   
Reply with quote  
YK
PostPosted: Mon May 23, 2011 9:06 pm 
Offline
Members

Joined: Mon Jul 04, 2005 5:37 pm
Posts: 64
Location: Utah
Hey, Ned, let me ask you this: what's that hole is for? Seems like it is extra...

:mrgreen: :mrgreen:
Top
   
Reply with quote  
Ned Christiansen
PostPosted: Tue May 24, 2011 5:35 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4426
Location: MI
Good question YK, very astute of you to notice it :D .

Somebody at SHOT told me these new aluminum STI subrames can crack. There is a very thin spot, exacerbated by a cut in the frame that sorta delineates where grips "would" be if there were grips. The holes are along this cut to contain the crack.
Top
   
Reply with quote  
YK
PostPosted: Tue May 24, 2011 6:34 am 
Offline
Members

Joined: Mon Jul 04, 2005 5:37 pm
Posts: 64
Location: Utah
Well, exactly! That's why these holes remind me of ones that TechnaGlass dude drilled in my windshield, except that was after it cracked...

Seriously, nice forward thinking, Ned.
Top
   
Reply with quote  
Ned Christiansen
PostPosted: Tue May 24, 2011 6:38 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4426
Location: MI
STI is aware of the problem and taking measures to prevent it.
Top
   
Reply with quote  
Patrick Sweeney
PostPosted: Tue May 24, 2011 7:27 am 
Offline
Senior Member

Joined: Thu Nov 04, 2004 1:15 pm
Posts: 618
Location: MI
Min-myds? I can hardly wait to see what maxi-myds are. Or would they be Super-myds?
Top
   
Reply with quote  
Chad Kandros
PostPosted: Thu Jun 16, 2011 4:10 am 
Offline
Members

Joined: Tue Oct 02, 2007 5:03 pm
Posts: 142
Location: Hendersonville,Tn
Phenominal machine work Ned......keep that tree watered!

_________________
Kandros Customs Gunworks
www.kandroscustoms.com
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 15 posts ] 

» » »

All times are UTC-08:00

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited