ltwguns.com

Actions Speak Louder Than Words
It is currently Sat Mar 07, 2026 6:31 am

» » »

All times are UTC-08:00



Post new topic  Reply to topic  Page 1 of 1
  [ 24 posts ] 
  Previous topic | Next topic 
Author Message
CT Brian
PostPosted: Mon Jan 24, 2005 9:38 pm 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 8:16 am
Posts: 2115
Location: Casper, WY
I apologize for the poor quality of these photo's, but Steve B. wouldn't borrow me his camera.


A Smooth one:

Image

Image

Image

Image

Image


My Bride was kind enough to lend me her SideWinder:

Image

Image

Image

Image

Image


Just a 'simple' 5 inch:

Image

Image

Image

Image


Finally, a 'Two Frame/One Slide' Set:

Image

Image

Image

Image


Thanks for having a gander.......

_________________
CT Brian Custom
'Blending Art With Firepower'
Top
   
Reply with quote  
Jeffro
 Post subject:
PostPosted: Mon Jan 24, 2005 9:42 pm 
Offline
Moderator
Moderator

Joined: Thu May 20, 2004 8:27 pm
Posts: 189
Location: St. Louis, Missouri
REALLY neat work. GREAT attention to detail and many of what a good friend (a knifemaker) calls "hey lookie at this" items!

Jeffro
Top
   
Reply with quote  
DEA
 Post subject:
PostPosted: Mon Jan 24, 2005 9:55 pm 
Offline
Senior Member

Joined: Thu Dec 09, 2004 9:02 am
Posts: 247
Location: Kalifornia
Tim, I dig the Browning cuts on the slide!

Awesome blasters!
Top
   
Reply with quote  
Steve Bailey
 Post subject:
PostPosted: Mon Jan 24, 2005 10:51 pm 
Offline
Administrator
Administrator

Joined: Mon Feb 16, 2004 3:47 pm
Posts: 1812
Location: Tempe, Arizona
Eye Poppin' ladies Tim. Absolutely beautiful work. Have you done this before?

Image

_________________
Heirloom Precision, LLC.
480-804-1911

"If everyone is thinking alike, someone isn't thinking."
- General George Patton Jr
Top
   
Reply with quote  
twong11219
 Post subject:
PostPosted: Tue Jan 25, 2005 1:48 am 
Offline
Members

Joined: Thu Jan 20, 2005 2:44 am
Posts: 40
Your work has definitely improved since I first saw it. You just sent shivers down my spine when I saw the 5in. Even clocking the screws. Now your teasing me. :D
Top
   
Reply with quote  
smooth one
 Post subject:
PostPosted: Tue Jan 25, 2005 3:01 am 
Offline
Senior Member

Joined: Wed May 05, 2004 9:22 am
Posts: 593
Location: GA
Simply work of arts. I can't wait to fondle your ladies. :P
Top
   
Reply with quote  
ktmhk53
 Post subject:
PostPosted: Tue Jan 25, 2005 3:27 am 
Offline
Members

Joined: Fri Oct 15, 2004 1:56 pm
Posts: 31
SHWEEEEEEET!!!!! :shock:

ktmhk53
Top
   
Reply with quote  
Damian Worthy
 Post subject:
PostPosted: Tue Jan 25, 2005 3:42 am 
Offline
Moderator
Moderator

Joined: Mon May 10, 2004 1:01 pm
Posts: 255
Very cool!

Be well!

_________________
damian@adcofirearms.com
http://www.adcofirearms.com
Top
   
Reply with quote  
JeffVN
 Post subject:
PostPosted: Tue Jan 25, 2005 4:06 am 
Offline
LTW Supporter
LTW Supporter

Joined: Thu Sep 09, 2004 3:48 pm
Posts: 321
Location: Las Vegas, NV
Nicely done - will they be at your "individual both" or the LTW booth?

JeffVN
Top
   
Reply with quote  
Zuma
 Post subject:
PostPosted: Tue Jan 25, 2005 6:32 am 
Offline
New Member

Joined: Thu Apr 08, 2004 10:13 am
Posts: 27
Location: Ohio
Verrry nice, Tim. I love the browning cut on the Colt. I've been thinking of a Colt lately. This is giving me some ideas. We may have to talk soon.

Tom
Top
   
Reply with quote  
bp1911
 Post subject:
PostPosted: Tue Jan 25, 2005 6:46 am 
Offline
Members

Joined: Thu Mar 04, 2004 9:38 pm
Posts: 70
Location: Las Vegas
Tim,

I like it!! Now I can't wait to see it in person. There appear to be many subtle touches that I can't wait to see first hand. Note to self.... always trust Tim's judgement. You are really tempting me with that sidewinder though.......
Top
   
Reply with quote  
Ray Harms
 Post subject:
PostPosted: Tue Jan 25, 2005 7:08 am 
Offline
Moderator
Moderator

Joined: Tue Mar 16, 2004 4:43 pm
Posts: 329
Location: AZ
Tim,

Awesome work. I can't wait to get my hands on them.

Ray

_________________
-------------------------

http://www.harmscustomdesigns.com
Top
   
Reply with quote  
Don Williams
 Post subject:
PostPosted: Tue Jan 25, 2005 7:31 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 1:25 pm
Posts: 1193
Location: Chino Valley, AZ
Tim, Some gorgeous stuff. I'm taking 4. Two customer guns and 2 I just finished. I don't think I'll get pics up. I absolutely HATE doing that, as my photos suck bigtime. :cry:

_________________
Don Williams
http://www.theactionworks.com
http://www.ltwguns.com
Top
   
Reply with quote  
CT Brian
 Post subject:
PostPosted: Tue Jan 25, 2005 8:33 am 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 8:16 am
Posts: 2115
Location: Casper, WY
Thanks for the kindness, guys. It really does mean a lot.

Quote:
Have you done this before?
Nope. First time. The ladies are virgins........

Quote:
You just sent shivers down my spine when I saw the 5in. Now your teasing me. :D
Hey everyone!!!! Take a look at the serial # on the 5" and just see if you can guess who I built it for...... Go ahead - just try!!!!
How's THAT for teasing, twong? :twisted:

Quote:
Simply work of arts. I can't wait to fondle your ladies. :P
If I had a nickle for every time I've heard that, I'd be up to seventeen cents by now........... :wink:

Quote:
will they be at your "individual both" or the LTW booth?

JeffVN
They'll be at the LTW booth. I am truly honored to be included in this group of builders, and can virtually guarantee that the LTW booth will be the hands down winner of the 'SHOT Show 2005 Gun pron' award.

Quote:
This is giving me some ideas. We may have to talk soon.

Tom
You know, it HAS been a while since we did some plotting, hasn't it?Image

Quote:
Now I can't wait to see it in person.
I believe that's just about to happen.

Quote:
Tim,Awesome work. I can't wait to get my hands on them.Ray
Thanks Ray. Two more days.

_________________
CT Brian Custom
'Blending Art With Firepower'
Top
   
Reply with quote  
Dave Berryhill
 Post subject:
PostPosted: Tue Jan 25, 2005 9:24 am 
Offline
Members

Joined: Sat May 29, 2004 11:00 am
Posts: 145
Location: Republic of Texas
Wow Tim! All I can say is WOW!

_________________
Dave Berryhill
Berryhill Custom, LLC
Top
   
Reply with quote  
Chuck Rogers
 Post subject:
PostPosted: Tue Jan 25, 2005 9:41 am 
Offline
Senior Member

Joined: Fri Feb 20, 2004 9:48 am
Posts: 888
Location: Prescott Valley, AZ
Tim,
Those are some of the most handsome guns I have ever seen! :D
The edge breaks at the end of the slide are impossibly PERFECT. :shock:

_________________
http://www.rogersprecision.com
Top
   
Reply with quote  
George Smith
 Post subject:
PostPosted: Tue Jan 25, 2005 9:46 am 
Offline
LTW Associate Member
LTW Associate Member

Joined: Sat Jan 22, 2005 7:52 pm
Posts: 43
Location: Quakertown Pa.
Outstanding work.

geo
Top
   
Reply with quote  
John Harrison
 Post subject:
PostPosted: Tue Jan 25, 2005 9:58 am 
Offline
Board Member
Board Member

Joined: Thu Feb 19, 2004 10:26 am
Posts: 1306
Location: Kennesaw, GA
Can't wait for the weekend so I can check out these bad-boyz in person!

Awesome work there, Tim!

Awesome pics, too!

_________________
shop.HarrisonCustom.com
www.HarrisonCustom.com

The grand essentials to happiness in this life are something to do, something to love and something to hope for.
Top
   
Reply with quote  
JohnDelPinto
 Post subject:
PostPosted: Tue Jan 25, 2005 12:27 pm 
Offline
Moderator
Moderator

Joined: Fri Feb 20, 2004 5:58 pm
Posts: 357
Location: Long Beach, CA USA
HOLY COW!!! :shock: You don't have #100 Sidewinder hidden anywhere do you??

_________________
John Del Pinto
Top
   
Reply with quote  
CT Brian
 Post subject:
PostPosted: Tue Jan 25, 2005 2:18 pm 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 8:16 am
Posts: 2115
Location: Casper, WY
Thanks Don, Chuck, George and John H. Getting an attaboy from YOU guys made my day!
Quote:
HOLY COW!!! :shock: You don't have #100 Sidewinder hidden anywhere do you??
Afraid not John. But remember, good things come to those that wait..........

Besides, once you actually handle the goodies, you might want to make modifications to your orders.

Yeah, that's it! See - I did a GOOD thing by not having your stuff done yet! :oops:

_________________
CT Brian Custom
'Blending Art With Firepower'
Top
   
Reply with quote  
JohnDelPinto
 Post subject:
PostPosted: Tue Jan 25, 2005 4:11 pm 
Offline
Moderator
Moderator

Joined: Fri Feb 20, 2004 5:58 pm
Posts: 357
Location: Long Beach, CA USA
Damn straight!! No rush, I will be content to see a Sidewinder in person. Besides, that Bailey fellow might put some unwanted type of vicscous material on it. I am glad you're able to work on the Series IIs, at least the one I sent you didnt have the external extractor though. Anticpation is half the fun of getting a nice custom....now I got to plan my new project for the year and find a nice S70 to send you.
Quote:
Thanks Don, Chuck, George and John H. Getting an attaboy from YOU guys made my day!
Quote:
HOLY COW!!! :shock: You don't have #100 Sidewinder hidden anywhere do you??
Afraid not John. But remember, good things come to those that wait..........

Besides, once you actually handle the goodies, you might want to make modifications to your orders.

Yeah, that's it! See - I did a GOOD thing by not having your stuff done yet! :oops:

_________________
John Del Pinto
Top
   
Reply with quote  
bill1911
 Post subject:
PostPosted: Tue Jan 25, 2005 6:27 pm 
Offline
New Member

Joined: Wed Jan 12, 2005 6:11 pm
Posts: 6
Location: Raleigh, NC
Sweeeeet. :D

Those are awesome, Tim. I can't wait to fondle, I mean admire those on Friday.
I'll do you a favor, I know storage space on your Hawg is scarce, so I will carry the girls back to NC with me for a few days and send them back to you as soon as you arrive back in Colorado. I Promise. :twisted:

Hey, that's the kinda guy I am!!!

_________________
Regards,
Bill
Top
   
Reply with quote  
Ned Christiansen
 Post subject:
PostPosted: Tue Jan 25, 2005 7:35 pm 
Offline
Board Member
Board Member

Joined: Fri Feb 20, 2004 5:30 pm
Posts: 4426
Location: MI
I'm with Chuck-- the corner breaks, the perfect contrast between matte and polished, and the classy placement of both-- MMmmmm. The front end matted, but the front chamfer polished? Different to the extent that I would call it brave, and worth the risk to my eye. Vay, vay cool, Herr Brian.
Top
   
Reply with quote  
Stan Chen
 Post subject:
PostPosted: Tue Jan 25, 2005 10:44 pm 
Offline
Firearms Industry
Firearms Industry

Joined: Mon Feb 23, 2004 9:40 pm
Posts: 676
Location: Durango, CO
TIM! You be da MAN!

Those have to be the CRISPEST lines I've ever seen! :D

Someday if you see a short balding chinese guy peering through your shop window, don't shoot or call SWAT, it's just me spying trying to figure out how the heck you do that :lol:

Oh man oh man this is gonna be a great booth.

_________________
Stan Chen Customs
http://www.chencustoms.com
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 24 posts ] 

» » »

All times are UTC-08:00

Who is online

Users browsing this forum: Google [Bot] and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited